background image

If your BISSELL product should require service:

Call BISSELL Consumer Services at the numbers below and we will give you the location of a 

BISSELL Authorized Service Center in your area. For all other countries, contact your local in 

country distributor for questions, service, or repair. 

If you have questions about your warranty or need replacement parts please contact the  

numbers below.

Or visit the BISSELL website -

 

www.bissell.com

When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date:  ___________________

NOTE: Please keep your original sales receipt. It  

provides proof of purchase date in the event of a  

warranty claim. See Warranty on page 15 for details.  

©2011 BISSELL Homecare, Inc

Grand Rapids, Michigan

All rights reserved. Printed in China

Part Number 110-4339

Rev 9/11

Visit our website at:

www.bissell.com

B

ISSELL consumer services

w w w . b i s s e l l . c o m  

16

For UK inquiries:

Monday - Thursday  9 am — 5 pm 
 

Friday 

9 am — 4 pm 

BISSELL Homecare (Overseas) Inc.

Ground Floor 

226 Berwick Avenue 

Slough 

Berkshire, SL1 4QT 

United Kingdom 

Telephone: 0844-888-6644    

For spare parts and accessories:

Monday - Friday     9 am — 5:30 pm 

Exserve Ltd.

550, Peterborough

Cambridgeshire, PE2 6WH

Telephone: 01733-362415 

Summary of Contents for 42H5 Series

















Reviews: