w w w. b i s s e l l . c o m
A
ssembly
6
Your Healthy Home PROheat All
Rounder is easy to assemble and
requires no tools:
1.
Attach hose to Quick Release™ Hose
Door by inserting fitted end and turning
clockwise until you hear it click into the
locked position.
2.
Attach hose solution line to unit by
inserting fitted end into the machine.
Turn clockwise until it snaps into place.
3.
Snap the two wand pieces together by
lining up tabs with holes and clicking
together. Be sure that the wand piece
with the adaptor (see figure 4a) is
the one you will attach to the tool to.
Attached assembled wand to grip
using the same technique.
4.
Snap the desired tool on the end of the
wand. Place wand adaptor into the wand
caddy on the side of the unit.
5.
Place either tool caddy or solution tank
(if wet clean mode is desired) onto the
back of the machine.
CAUTION:
Do not plug in your cleaner
until you have completely
assembled it per the following
instructions and are familiar
with all instructions and
operating procedures.
Wand Adaptor
1
2
3
4
4a
Wand Caddy
5
