w w w. b i s s e l l . c o m
15
M
aintenance and care
Machine care continued
5.
a.
Pre-motor filter: Take apart the top
lid by pulling the tab away from the
separator. Inspect the foam filter. If
dirty, rinse clean and allow to dry
before returning it to the machine.
Re-assemble the top lid by placing
the filter in its spot and re-attaching
the separator. Use care to make
sure the “T” pieces are lined up
under the shallow grooves on the
top lid itself. For replacement filters,
see pages 18-19.
b.
HEPA Media filter*: This filter is
located at the back of the machine,
underneath the Quick Release Cord
Wrap. Use one finger to depress the
latch and pull the door down. Open
towards you and down to the ground.
Use two hands to remove the filter
from its slot. If dirty, rinse clean and
allow to dry before returning it to the
machine. Make sure the filter door
is fully closed prior to operating the
machine. For replacement filters see
pages 18-19.
* The filter media, not the vacuum as a whole, complies with the
IEST-RP-CC001.5 HEPA standard.
