Use only BISSELL Style 8 Replacement Belts (#3200) in your BISSELL Lift-Off.
Unplug cleaner from electrical outlet.
With Rotating Floor Brush removed from vacuum cleaner (Steps 1-5
of Check Rotating Floor Brush and Drive Belt), grasp old Drive Belt
and remove from Motor Pulley. Discard old Drive Belt.
Place new Drive Belt over Motor Pulley and stretch other end over
Rotating Floor Brush in the space between the bristles.
Place ends of Rotating Floor Brush down into slots on sides as shown.
Turn Rotating Floor Brush by hand several times in the direction of
Motor Pulley. If properly installed, Drive Belt will center itself on
Rotating Brush crown.
Reposition Brush Cover and screws. Tighten screws securely.
Use only BISSELL Replacement Bulb (#203-1007) in your BISSELL Lift-Off.
Unplug cleaner from electrical outlet.
Remove Detachable Canister and recline Handle of vacuum.
Using a screwdriver, remove the one screw as shown and lift off the lens.
Remove the bulb from the socket by pushing in gently and turning it
towards brush. Install the new bulb by pushing it gently into the
socket and turning away from brush.
Reposition lens and secure with the one screw.
Replace Drive Belt
1.
2.
3.
4.
5.
Replace Light Bulb
1.
2.
3.
4.
5.
6.
