global.BISSELL.com
11
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
Important:
The filter must be cleaned and dried after every use to maximize suction and performance.
Replace the filter every 3 months.
1.
Press the button on the top of
the foot to release the brush roll
window.
2.
Pull the brush roll tab to
remove.
3.
The brush and window can
be hand washed.
4.
Remove filter from the top
of the tank by pulling it up.
5.
Wash filter and screen
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
6.
Leave all parts out to dry
before reassembling.
7.
Place the end of the brush
into the right side of the foot.
8.
Press the tab of the brush
down so it locks into place.
9.
Replace the brush roll
window by lining up tabs on
the edges of the foot.
CONTINUED ON NEXT PAGE
After-Cleaning Care
Go to
global.BISSELL.com
for a full list of how-to videos.
