www.BISSELL.com.au
9
With dirt container removed,
press filter cover release button
to access post-motor filter.
Cleaning the Post-Motor Filter
Clean all filters with
mild detergent, rinse,
and squeeze all excess
water. Allow filters to
dry completely before
reinserting.
2
1
Cleaning the Separator
Remove the separator
by twisting to the left
(counterclockwise), then
pull it out through the
bottom of the tank. Rinse
and dry all sections of dirt
container with paper towel.
Press the tank
release button
and pull handle
to lift dirt
container away
from vacuum.
1
2
Maintaining the TurboBrush® Tool
If paddle wheel gets
dislodged, align the two
clips on each side and
pop into place.
Twist gray collar counter-
clockwise, until slot
appears then separate
faceplate. Carefully
remove brush, replace
belt and brush if needed.
The faceplate will not
close properly if all
parts are not aligned
correctly.
Align
Slot
Paddle Wheel
Roller
Belt
1
2
3
