www.BISSELL.com.au
5
Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
Place the upper
handle onto the
base and push
it down. Then
attach the handle
with the 2 screws
that are taped to
the handle in a
plastic bag.
Next, insert the wand
base and turn it to the
left to lock it into place.
Put your accessory tools on the
vacuum and you’re ready to go!
NOTE:
The crevice tool can be found inside the extension wand. You can remove
it to use it and put it back to store it neatly out of your way when you’re finished.
TurboBrush®
Tool
Remove filter in unit and
replace. Return dirt tank
back onto vacuum.
1
2
4
6
5
Open the dirt
container lid
by lifting the
release latch
on the front.
Next, insert the end of
the hose into the back of
the vacuum and twist to
lock it into place.
3
Now wrap the
hose through
the hose clip
and connect
the hose wand
to the foot
hose down at
the bottom of
the vacuum.
To replace the filter,
press the tank release
button and pull handle
to lift dirt container
away from vacuum.
7
Extension Wand
(with Crevice Tool inside)
