manualshive.com logo in svg

Bissell 2112 SERIES, User Manual

Share
Download
Bissell 2112 SERIES User Manual Download Page 8

www.BISSELL.com

8

Emptying the Dirt Container

Remove Dirt 

Container by 

pushing the 

Dirt Container 

Release Button 

on top of the 

tank handle.

Holding Dirt 

Container over 

garbage bin, press 

Release Button on 

back. Snap bottom 

back into place 

and return to unit, 

pushing to lock 

into place.

1

2

Power Cord Storage

When you have finished using your vacuum, 

store the power cord on the cord wraps. 

Loop power cord around cord wraps on back 

of cleaner, making certain the Upper Quick 

Release cord wrap is pointed up towards the 

handle and the Lower Quick Release cord wrap 

is pointed down towards the floor. Clip molded 

plug to power cord to secure.

WARNING

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from 

electrical outlet before performing maintenance or troubleshooting checks.

NOTE: 

The dirt container may be washed in warm water with a mild detergent. 

Rinse and dry thoroughly before re-attaching it. This is not dishwasher safe.

Summary of Contents for 2112 SERIES

















Reviews:

No comments

Brands by name

Popular brands

Load more brands