manualshive.com logo in svg

Bissell 2112 SERIES, User Manual

Share
Download
Bissell 2112 SERIES User Manual Download Page 11

www.BISSELL.com

11

Cleaning the Brush Roll

NOTE: 

If an object becomes lodged in foot and brush shuts off, turn vacuum  

off and unplug from electrical outlet. Remove obstruction and brush will 

automatically reset when vacuum is plugged and turned back on.

WARNING

To reduce the risk of electric shock, turn power switch OFF and disconnect plug from 

electrical outlet before performing maintenance or troubleshooting checks.

Place vacuum upside down with brush 

roll facing upwards. Remove 5 screws 

with a Phillips screwdriver.

1

2

3

Lift off brush cover and grasp floor 

brush at both ends to lift out. Clean 

debris from brush roll, motor pulley, 

and drive belt. If brush roll is worn, 

replace as needed.

4

5

Check air passageway for obstructions. 

When finished cleaning, align brush roll 

with belt turning by hand several times 

in the direction of the motor to align 

the belt on the floor brush. 

Separate the 

hose from the 

hose wand base 

to look through 

hose for clogs. 

Remove debris 

from this area.

6

Replace the brush cover and 5 screws.

Summary of Contents for 2112 SERIES

















Reviews:

No comments

Brands by name

Popular brands

Load more brands