w w w. b i s s e l l . c o m
9
M
aintenance and care
Reduced spray oR no spray
possible causes
Remedies
1. Solution tank empty
1. Refill tank with water and formula
2. Lint screen on solution tank cap clogged
2. Soak solution tank cap in warm water and then rinse under
running water
3. Spray nozzle clogged
3. Clean spray nozzle by rinsing under water
4. Upper handle is not in the upright and locked position
4. Rotate the retractable handle lock, pull handle up and return
the handle lock to the locked position.
5. Upper body not attached properly.
5. Repeat steps 2-4 on page 5.
deep cleaner not picking up cleaning solution
possible causes
Remedies
1. Collection tank not aligned/secured
1. Check tank alignment and secure with side latches
2. Collection tank full
2. Empty tank
3. Removable nozzle installed improperly
3. Unplug unit. Align two "hooks" into bottom first, then snap
into place on top
4. Removable nozzle full of debris
4. Unplug unit. Remove nozzle and rinse under running water
5. Red lint screen under collection tank clogged
5. Remove debris from lint screen
brush not turning
possible causes
Remedies
1. Handle not tilted back.
1. Recline the handle to activate the PowerBrush. Follow
step 4 under "Carpet Cleaning" on page 7.
other maintenance or service not included in the manual should be
performed by an authorized service representative.
thank you for selecting a bissell product.
please do not return this product to the store.
T
roubleshooting
Machine storage
for best results, a few simple steps can
assure your machine is well maintained
after your cleaning is complete.
1.
Wrap power cord around Quick Release
Cord Wrap™ on side of the machine.
2.
Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
note: you may have cleaning
solution remaining in the solution
tank. you may store your machine
this way for the next cleaning
task, but never keep dirty water
in the collection tank.
