www.BISSELL.com
10
Problem
Possible causes
Remedies
Vacuum
cleaner
won’t run
Power cord not plugged in
Check electrical plug
Blown fuse/tripped breaker
Check/replace fuse or reset breaker
Vacuum
cleaner won’t
pick up dirt
Dirt bag is full
Replace bag
Filter dirty
Check, remove debris or clean
Hose not secure
Check to ensure the hose is secured
into place at both ends
Bag door is not in place
Make sure the bag isn’t caught
between the door and the body of
the unit and snap the door into place
Vacuum path clogged
Visually check air passageway, hose
inlet, and hose for anything that
might be obstructing the vacuum
path. Carefully remove blockage
Rotating power brush drive belt
broken
Replace drive belt
Drive belt stretched
Check drive belt area and remove
obstructions. Replace drive belt if
necessary
Floor brush bristles worn
Replace floor brush
Floor brush jammed
Remove floor brush and clean debris
from brush and ends, then check
drive belt for any damage
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
