Reclined
In Use
Upright
Locked
in Place
www.BISSELL.com
6
PowerBrush Switch
Adjusting the Variable Suction
PowerBrush will not run
when vacuum is locked in
upright position.
If debris is entangled in
brush, brushroll automati-
cally turns off. Unplug cord,
remove debris, then press
red Brush Reset button.
If debris is keeping vacuum
from operating, unplug cord,
remove debris, and then
press Brush Reset button
to resume vacuuming.
Turn vacuum ON before
turning ON PowerBrush.
Press brush side
of button to run
PowerBrush.
Locate Variable Suction Control Valve.
Twist counter-clockwise to reduce suction.
NOTE:
Some frieze carpets have long delicate fibers or threads that may be
damaged by rotating brush. Turn off the PowerBrush when cleaning this and
other similar types of carpet.
PowerBrush
ON / OFF
Power
BrushReset
suction control
Twist Valve - Marker
moves to indicate
suction level
FULL
REDUCED
Full
Suction
Reduced
Suction
suction control
Twist Valve - Marker
moves to indicate
suction level
FULL
REDUCED
Full
Suction
Reduced
Suction
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
2
2
1
1
