Serenity
Constant Volume Single Point Extract Fan
INSTALLATION INSTRUCTIONS
4
READ ALL INSTRUCTIONS BEFORE
COMMENCING INSTALLATION
•
Observe appropriate safety precautions if working on
steps or ladders. Wear eye protection when breaking
out wall or window materials etc.
•
The fan should not be sited where it would be
subject to a direct source of heat in excess of 40ºC.
•
When installing ensure that there are no buried
cables or pipes in the way. It is recommended that
this fan is mounted 1.8m above floor level.
•
A clearance of 75mm to be allowed on at least one
side of the fan for the removal of the internal grille.
•
The appliance is not intended for use by young children
or infirm persons unless they have been adequately
supervised by a responsible person to ensure that they
can use the appliance safely. Young children should be
supervised to ensure that they do not play with the
appliance.
•
Siting Notes: Where an open-flued oil or gas-fuelled
appliance is installed in the kitchen, extract ventilation
can cause the spillage of flue gases. Care must be taken
to ensure ventilation is reduced appropriately, as set out
in the Building Regulations. Kitchens with solid-fuel
appliances should not have extract fans fitted.
•
Ensure metal retaining bracket is used in all installations.
05.10.899 (MCR 618) Issue 2 March 2011
The Serenity is a continuously running extract
fan, designed to offer a simplistic approach to
the Building Regulations and an energy
efficient domestic ventilation solution. The
design concept revolves around 'one product',
which has been designed to be flexible in
application and to meet the performance
requirements of all wet rooms within a
dwelling (to be configured during installation).
The Serenity fan is also silent in operation and
is supplied with an aesthetically styled
decorative cover.
T: 01276 605800 F: 01276 469094
www.bisque.co.uk
•
The fan is double insulated and does not
require an earth connection.
•
The fan must be connected to a double pole
isolating switch having contact separation of at
least 3 mm.
•
When supplied from a 6 amp lighting circuit
no local fuse is required.
230V Wiring Diagrams
Fan Specifications
230V Model:
220-240V ~ 50Hz / 1Ph IP24
5.5 Watts max. 5, 10 & 15 L/S
airflow performance
Cable Sizes
:
Fixed flat wiring 2 core 1mm
2
,
3 core 1/1.5mm
2
With Boost
Without Boost
230V
/
50Hz
/
1Ph
230V
/
50Hz
/
1Ph
The electrical connections must be carried out by a qualified electrician in accordance with IEE or local regulations.
WARNING: Isolate electricity supply before starting work.
180
180
125
48
25.5
Ø99
Ø52
Front
Side
