Revision 2.0
Figure 15: Homing sensors cabling with the homing sensors mounted to the homing sensor housings.
The homing sensors can now be installed by reversing the procedures described above.
See “Through the Mount Cabling” in the Paramount ME User Guide:
http://www.bisque.com/sc/media/p/28169.aspx
for details how to run the homing sensor
cable and homing sensor up to the declination axis.
IMPORTANT ASSEMBLY NOTES:
Do not over tighten the two button head cap screws that hold the plastic sensor in
the housing. Over tightening the two screws will deform the optical sensor. Also,
tighten each evenly as opposed to tightening one completely, then the other.
Remember that the sensor orientation is critical.
The longer (teal colored) cable is for the declination axis homing sensor. Before
mounting the homing sensor housing, this cable must be run through. In other
words, you cannot install the declination homing sensor fully assembled as shown
in Figure 10.
