(1) When used in the field
(2) LOCK PIN
(3) When moved on road
8. Handling tips
Adjust the handlebar height to a comfortable position (waist height for normal
tilling). Should the machine jerk forward while tilling. Press down the handlebars. If the
machine will not move forward, move the handlebars from side to side.
Turn:
The proper method of negotiating a turn during a tilling operation is to
lower the handlebars to bring the gravity centre toward the rear and then make the turn
this will permit a turn to be made with relative ease.
9. Normal operating angle
Lower the handle slightly so the front of the machine is raised about 6-8°
To get the maximum advantage from the tiller, try to hold the machine at the angle
shown while you are tilling the ground
CAUTION:
z
Do not use the tiller with a rotor whose diameter is in excess of 300mm.
www.italiastar.ro
004/021.433.03.27
Italia Star Com Due S.R.L.
50