Bism Neleus JX3010 Operating Manual Download Page 2

    

Warning

●Do  not  use  this  product  for  any  purpose  other  than 

recreational diving. In particular, please do not use it  as 

a lifesaver or a float. Air may fall out and it may  cause to 

be drowned.

2

 IMPORTANT INFORMATION

Purpose of Use

This product is diving gear for recreational diving use.

The connection with a regulator allows the use and is buoyancy compensator “adjusting neutral 

buoyancy” at the time of recreational diving.

Before Use

Carefully read the advice on safety given in this manual and also in the manual of a regulator before diving.

     

Warning

●Use  this  product  after  having  obtained  a  C-card  and 

completing a proper training program at a recognized 

diving school, and be familiar with a B. C., or under the 

instruction of the diving school. Otherwise it may cause 

an accident resulting in injury or death.

   

Warning

●When you use this product, please follow all the 

instructions about the safety directed in this operating 
manual.

■Do not use this product as a lifesaver or a float.

■Please follow instructions about safety.

■ Obtain C-card before use.

   

Warning

●Do not use this product if it is not functioning normally.

●If  your  B.  C.  starts  to  function  abnormally,  contact  your 

original dealer or authorized distributor of our company. 

Using a faulty B.C. may cause an accident resulting in 

injury or death.

■Do not use if functioning abnormally.

Float Explosion Prevention Equipment

■Relief Valve

When air has been supplied to float of B. C. excessively by 

mistake, in order to prevent the burst, if internal pressure of 

float exceeds certain pressure, it is in structure to open the 

relief valve automatically and release air from a housing.

Special Features

Specifications

Body

Relief Valve

Position: One in right shoulder, one in right waist portion

Exhaust operation pressure at the time of over pressure: 0.2 

bars or less.

Tensile force necessary for quick deflation: 9.8

14.7 N (1

1.5kgf)

Combination Valve

Hose Portion

Material: Inner tube  

Vinyl chloride

      Outer cover  

Vinyl chloride

   

Coupling

Copper alloy

Outer diameter 

 13 mm

  

                    

Hose length

700 mm 

Nominal size of coupling threads

3/8-24UNF

 

     Maximum operating pressure

15 bar

Minimum bending radius (Inside of hose)

115 mm 

Hose guard

 ;

Regular equipment

Corrugated hose length: 550 mm (L and XL size of JX is 670 mm)
(Length from the center of a housing to the end of an oral button)
Weight: 405 g

  

Air supply flow: 80 liter/minute

■Adoption of Quick Release Shoulder Buckle. (Page 11)

The quick release buckle which can easily loosen a 

shoulder belt with only a thumb is adopted.

■H. f. s. Float Structure is Adopted.

When air is supplied to a B. C., the float structure which 

inflates so that the body may be wrapped in by the 

effect of a special shape rib is adopted.
■Adoption of Thin Harness.

The newly-designed thin harness which distributes 

weight appropriately by bringing a tank close to your 

body is adopted.
■2 Way Inflator is Adopted. (Page 13)

The 2 way inflator system which can also turn a 

corrugated hose from the back side to use is adopted.

■Adoption of Waist Curve Line.

The waist curve line which fits the body easily by 

making a curve around the waist is adopted.

■F.T.A.(Front Tightening Adjuster)is Adopted.

(Page 13)

By changing the length of a stretch code, you can 

adjust movement of the front portion (pocket portion) 

of B. C. toward the upper and lower sides to be tight 

or loose.

The maximum buoyancy: XS: 117N (12kgf), S: 137N 

  

(14kgf),M: 157N (16kgf), L: 196N (20kgf)XL: 245N (25kgf)

245N(25kgf)

Weight: (JX3010Q has M, L and Xl size only)

 [JX3010D] ;XS:3.3kg, S:3.4kg, M:3.5kg, L:3.7kg, XL:4.0kg

 [JX3010Q] ;                   M:3.9kg, L:4.1kg, XL:4.4kg 

Length of beltline

55 cm

110 cm

Loading weight of a pocket  

 5kg or less (One pocket)

Temperature range     

;-

5

~+

50

Material: Thermo-plastic coating cloth

 

Basic cloth: Nylon

  Back side: Polyurethane

■Adjustment Mechanism of Shoulder Belt Length (Page 7)

The maximum length of shoulder belt is adjustable.

■Adjustment Mechanism of Cummerbelt Length 

(Page 6)

●Cummerbelt length at the waist portion is adjustable.

●Also,  we  sell  as  an  option  the  extension  belt  which 

can extend a waist belt by 20 cm. Please contact your 

original dealer or authorized distributor of our 

company. (Extra charge)

■Long Tank Buckle (Page 8)

The long tank buckle which you can fix to a tank without 

particular strong power is adopted.
■Easy Exhaust Operation (Page 12)

●The exhaust, power deflation, by the “OUT” button can 

be performed.

●The exhaust by the “ORAL” button is possible.

●When  exhaust  knob  of  a  shoulder  belt  portion  is 

pulled, the exhaust, quick deflation, from relief  valve 

of a right shoulder can be performed.

●When  exhaust  knob  of  a  right  waist  portion  is  pulled, 

the exhaust, quick deflation, from relief valve of a 

right waist is possible.

Summary of Contents for Neleus JX3010





















Reviews: