Bisek Cycle
Ensure brake shoe pads are not over worn and are correctly position
in relation of the rims .
Ensure brake control cables are lubricated, correctly adjusted and
display no obvious wear.
Ensure brake control levers are lubricated and tightly secured to the
handlebar.
2. Wheel and Tires
Ensure tires are inflated to within the recommended limit as displayed
on the tire sidewall
Ensure tires have tread and have no bulges or excessive wear.
Ensure rims run true and have no obvious wobbles or kinks.
Ensure all wheels spokes are tight and not broken.
Check that axle nuts are tight. If your bicycle is fitted with quick
release axles, make sure locking levers are correctly tensioned and in
the closed position.
3. Steering
Ensure handlebar and stem are correctly adjusted and tightened, and
allow proper steering.
Ensure that the handlebars are set correctly in relation to the forks and
direction of travel.
Check that the headset locking mechanism is properly adjusted and
tightened.
If the bicycles is fitted with handlebar end extensions, ensure they are
properly position and tightened.
4. Chain
Ensure chain is oiled, clean and runs smoothly.
Extra care is required in wet or dusty conditions.
5. Bearing
Ensure pedals are securely tightened to the cranks.