Bisek Cycle
●
Operation
1. ON/OFF
Hold ON/OFF button to startup; hold ON/OFF button for a second time to turn off the meter.
After 5 minutes of motor or meter not working, the LED display will be turned off automatically
and cut off the power supply.
2. Headlight
After turn on the display, hold
▲
to turn on the headlight. Take same operation to turn off the
headlight.
3. Assist Ratio Gear(Assist) Switch
Hold
▲
and
▼
shortly to switch 1-5 virtual gear. Gear 1 is for the minimum power while 5 is
for the highest. Gear 0 is without boost function.
4. 6KM/H Assist Function
Hold
▼
button, the vehicle drives at the speed no more than 6KM/H. Release
▼
button, the
function is invalid.
5. Error Code Display
Electronic control system failure will display(flashing) fault code. Once the fault is resolved, it will
stop flashing.
Error Code
Definition
01_info
Throttle Abnormality
03_info
Motor hall signal
Abnormality
04_info
Torque sensor signal
Abnormality
05_info
Axis speed sensor
Abnormality(only applied
to torque sensor)
06_info
Motor or controller has
short circuit abnormality