6
5. The seat
Adjusting the height of the seat
The seat can be set to one of four heights.To adjust the
height open the clamp under the seat and pull the locking
pin out.
.
Rotation
Place your left hand under the seat. Hold the lever and
pull it up as far as it will go. You can now rotate the seat
45° in either direction until it locks. Release the lever and
make sure that the seat has been correctly and securely
positioned.
Adjusting the height of the back
• Loosen the two thumb screws
• Adjust the back section to the desired position
and hold it in place
• Tighten the two thumb screws again.
Seat width adjustment
• Loosen the thumb screw.
• Move the armrest to the desired position
• Tighten the thumb screw.
Fig. 4
Fig. 5
Fig. 6
Caution! When pulling the locking pin hold
the seat until it reaches the desired position.
Do not jam your fingers.
Abb. 7
