Bischoff & Bischoff GmbH | 12.05.2016
EN
13
12
PYRO LIGHT OPTIMA
| Lightweight wheelchair
Lightweight wheelchair |
PYRO LIGHT OPTIMA
4. Assembly/Adjustments
You can carry out the adjustments of your wheelchair yourself with a
little manual dexterity. You need a set of 5 mm to 8 mm Allen keys and
ring spanners, SW10 and SW13. You can contact your mobility dealer
if you have questions.
4.1 Folding and unfolding
Delivery
Your new B+B wheelchair is delivered fully assembled and folded in an
original B+B carton. To prevent damage during transport, attachable
mounting parts are delivered separately (fig. 2).
Unfolding
Position your wheelchair next to you. Tip it towards you until the load is
taken off one driving wheel (fig. 3). Now press with the flat of the hand
against the seat tube nearest you to unfold the wheelchair (fig. 4).
When unfolding it, keep your fingers on the seat
cover; otherwise there is a risk of pinching!
Folding
Position your B+B wheelchair next to you. Tip it by pulling the backrest
to you until the weight is taken off the opposite driving wheel. At the
same time, pull the seat cover upwards until the chair is completely
folded (fig. 5).
5
3
4
To prevent injuries, do not hold the wheelchair at
the armrest while folding. If legrests are fitted, the
foot plates should first be folded up.
4.2. Legrests
4.2.1 Legrests with foot plate
Both legrests are supplied with the foot plates attached. The foot
plates on both legrests can be folded upwards.
4.2.2 Attaching legrests
•
Hold the legrests on the upper part such that this part points
outwards. Operate the handle for the quick-release axle and push
the legrests with the guide profile into the hole in the frame (fig. 6).
•
Now the legrest is simply folded forwards and locks automatically
into place.
Before moving off, check for firm attachment of
the legrests!
4.2.3 Removing the legrests
To transport your wheelchair as compact as possible, you
can completely remove the legrests and foot plates
(fig. 7).
•
Pull the handle, that opens the locking device.
•
Swing the legrest 90° outwards and pull it upwards.
6
7
2
Please be careful with your fingers when making
adjustments. Risk of entrapment!
