Pag. 15
CLEANING THE SLICER
GENERAL
The machine must always be accurately cleaned at least once a day, and more often if
necessary.
Always use protective gloves.
DISASSEMBLING THE MACHINE FOR CLEANING
• Disconnect the plug from the mains;
• Turn the gauge plate to ‘0’;
• Remove the various components as described in the following paragraphs:
• Unscrew (anticlockwise) the blade guard rod (ref. 1);
• Remove the blade guard using for this operation only cover handle (ref. 2).
• Remove the slice guard.
To clean the machine body and the blade use only a cloth damped with water and
biodegradable lathery detergent having 7-8 pH and at a temperature not below +
30°C.
Do not clean the machine by using jets of water or vapor or similar systems.
WARNING:
Use scratch-proof and non-slip gloves to carry out the following operations.
Proceed carefully and pay attention to what you are doing.
Danger of cutting!
2
1