Pag. 10
MACHINE COMMISSIONING AND FUNCTION TESTS
INSTALLING THE MACHINE
Position the machine on a well leveled, smooth and dry top suitably dimensioned to with-
stand the machine weight.
ELECTRICAL CONNECTION
Install the machine near a compliant outlet derived from a system meeting the current
norms.
The user is responsible for
ascertaining that the electrical system is suitably dimensioned
and functions correctly (supply line, outlet, distribution panel, differential protecting breaker,
grounding).
Before carrying out the connection
ascertain that the mains characteristics correspond to
those indicated on the machine plate.
MANUAL USE
START AND STOP BUTTONS
•
Press the green button (1) to start running the blade.
•
The light turns on to indicate that the machine works correctly.
•
Press the red button to stop the blade (2).
Slice thickness
can be adjusted by turning the graduated knob (4) anti clockwise.
Thickness adjustment range:
see paragraph "Technical description and conditions of
use”.
AUTOMATIC USE
START AND STOP BUTTONS
•
Lift and pull the lever (3) (A + B) to engage the automatic movement.
•
Press the green button (1) to start running the blade.
•
Press another green button (1) to start the carriage mouvement.
•
The light turns on to indicate that the machine works correctly.
•
Press the red button to stop the blade and carriage (2).
Slice thickness
can be adjusted by turning the graduated knob (4) anti clockwise.
Thickness adjustment range:
see paragraph "Technical description and conditions of
use”.
FUNCTIONING TEST AND BLADE ROTATION DIRECTION
Start the machine and check whether the light is on; make sure that the blade rotates in the
direction indicated by the arrow (anti clockwise if you look at the machine from the blade
plate side).
•
Ascertain that the carriage and the pusher slide correctly;
•
Ascertain that the gauge plate works and adjust thickness to desired value.