BP-007 User’s Manual
- 29 -
5. In the window of “Printer Settings”, select parameter types in the Printer Setting Class, then select
the parameter items in the Options list. At last, select the parameter in the right column.
6. Click “Reset All” to recover all the parameter to the default settings and does not change the printer
parameter settings.
7. When setting parameter, you could click “Set Current” to save the current value after setting every
item. Also, you could click “Set All” to save the all the parameter values after setting all items. After
clicking “Set All” or “Set Current”, program would set the setting command to the printer.
8. Printer would change the parameter settings as soon as it receives the setting command. It is no
need to reboot the printer.
9. After finishing setting, click “OK” to exit the “Properties” window.
3.3 Self-Test Function
■
Self-Test Mode
While pressing the
FEED
key and holding on, turn on the printer. The printer would beep once,
then loosen the key, the printer would enter self-test mode.
■
Print-Pins Test
While pressing the
FEED
key and holding on, turn on the printer. The printer sounds two beeps,
and you should loosen the
FEED
key at the same time. The printer will enter the print-pins test.
