BP-007 User’s Manual
- 7 -
Note: 1. When your print becomes faint, you need to replace the ribbon cartridge. Otherwise,
the print quality will be affected and the print head may be damaged.
2. To remove the old ribbon cartridge, first make sure the power is turned off, then as
the upper figure shown, hold the ribbon cartridge handle on the left side to take out
the ribbon cartridge. Install a new one as the above steps.
3. Please use the original
compatible star RC 200B ribbon cartridge only. Manufacturer
will not honor warranty when using unauthorized ribbon cartridge.
2.6 Installing the Driver
Please use the cable to connect computer with printer, then turn on the computer and the printer, put
the driver CD into the CD-ROM. Install driver by the following ways:
Auto-installing way
Double click the file “Setup.exe” in the driver disc, install driver by the following direct.
Note: Auto-installing way needs the operating system of Windows 2000 or above.
Hand operated installing way
Note: The hand-operated installing ways of serial interface and parallel interface are the same.
1) The installing steps of parallel interface for Windows 2000/XP/Vista are as follows:
1 Click “Start”
→
“Settings”
→
“Select Printers”.
2. Click “Add Printer”, then it pops up a window of “Add Printer Wizard”, click “Next”, then please read
the select guide carefully, such as, select “Local printer” in the “Local or Network Printer” window,
then click “next”.
3. A window of “Select a Printer Port” pops up, select a usable port. Such as, select “LPT1:
(Recommended Printer Port)”, click “Next”.
4. A window of “Install Printer Software" pops up, click “Have Disk...”, click “Next”.
5. A window of “Install From Disk” pops up. Please according to the operating system environment, you
Figure 2-8 Installing the ribbon cartridge
Ribbon Cartridge
(Compatible Star
RC 200B)
Ribbon Knob
Upper Cover
Front Cover
Power Switch
Cover-open Button
Auto-cutter Assembly
Ribbon Core
57.5mm Paper stopper_Holder
Paper Holder
