BioVision Technologies CMAR-01 Quick Start Manual Download Page 2

Page: 2 / 3

BVT93569-00001-B

1. Attaching the camera:

I. ALIGN THE RED DOTS BEFORE INSERTING.

II.Insert the hybrid connector into the matching
receptacle on the SurgView light source.

III. Be careful not to over-stress the light probe.

2. Attaching the scope:

I. Pull the sliding sleeve on the front of the camera
handpiece.

II. Align the top indicator of the scope with the top
indicator of the handpiece.

III. Insert the scope and release the sliding sleeve.

Removing the scope:

I. Pull the sliding sleeve on the front of the camera
handpiece.

II. Remove the scope.

4. Focusing the camera:

I. Gently turn the focusing knob until the image is
sharply focused on the screen.

WARNING: DO NOT OVER

TURN!

II. Turning the focusing knob past its stop points will
damage the handpiece and voids the warranty.

Sliding Sleeve

ALIGN

RED

DOTS

Hybrid Connector

USING THE CAMERA MODULE

Summary of Contents for CMAR-01

Page 1: ...art FET The CMAR 01 Camera Module The CMAR 01 is a multipurpose camera for fiberscope endoscopy and arthroscopy The camera features a unified cable system for easy connection quick release scope conne...

Page 2: ...op indicator of the scope with the top indicator of the handpiece III Insert the scope and release the sliding sleeve 3 Removing the scope I Pull the sliding sleeve on the front of the camera handpiec...

Page 3: ...tem This damage is not covered by the warranty To ensure your safety and the safety of others around you always follow the manufacturer s instructions when using a sterilizer To ensure the optical per...