ACD HybEZ
™
II Hybridization System User Manual
321710-USM Date 05112017
14
4.
Decant the 1X Wash Buffer, refill with 300 mL fresh 1X Wash Buffer, and repeat the
proceeding step.
5.
Take the EZ-Batch
™
Slide Holder out of the Wash Tray, and shake it or tap the Holder on a
tissue to remove the residual Wash Buffer.
Note:
Minimize residual Wash Buffer on the slides, but do not shake the slides out of their
locked positions.
a.
Unit not turned on
b.
Unit not plugged into power
supply
c.
Fuses blown
d.
Power supply failure
a.
Push the Power Switch to turn on
the unit
b.
Plug in and turn on
c.
d.
Check that other electrical
appliances on the same circuit are
working
a.
Ambient temperature is higher
than set temperature
b.
Temperature control circuit fault
a.
Check set temperature
b.
Have unit checked by expert
a.
Actual temperature is lower than
set temperature
b.
Temperature control circuit fault
a.
Check set temperature
b.
Have unit checked by expert
a.
Gasket not sealing
a.
Replace Tray and Gasket
Assembly
