Biostar T-Series
TForce4 U 775
User’s Manual
15
4.3
T
ROUBLESHOOTING
Problem Solution
1.
No power to the system at all
Power light don’t illuminate, fan
inside power supply does not turn
on.
2.
Indicator light on keyboard does
not turn on.
1.
Make sure power cable is securely
plugged in.
2. Replace
cable.
3.
Contact technical support.
System inoperative. Keyboard lights are
on, power indicator lights are lit, and hard
drive is spinning.
Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.
System does not boot from hard disk
drive, can be booted from optical drive.
1.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged in;
check the drive type in the standard
CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard disks
are capable of breaking down at
any time.
System only boots from optical drive.
Hard disk can be read and applications
can be used but booting from hard disk is
impossible.
1.
Back up data and application files.
2.
Reformat the hard drive. Re-install
applications and data using backup
disks.
Screen message says “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure
correct information is in setup.
Cannot boot system after installing
second hard drive.
1.
Set master/slave jumpers correctly.
2.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility with
other drives.
