TF570 SLI BIOS Manual
14
Boot Up NumLock Status
Selects the NumLock State after the system switched on.
The Choices:
On
(default)
Numpad is number keys.
Off
Numpad is arrow keys.
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
A pin in the keyboard controller controls GateA20.
Fast
(default)
Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the
keyboard controller. When enabled, the typematic rate and typematic delay can
be configured.
The Choices: Disabled
(default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6
(default)
,
8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke.
The Choices: 250
(default)
,
500, 750, 1000.
Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
A password is required for the system to boot and is also
required to access the Setup Utility.
Setup
(default):
A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
