Biostar P4M800-M7A - BIOS SETUP Manual Download Page 33

Page: 33 / 36

P4M800-M7A BIOS Manual

8 PC Health Status

Figure 8. PC Health Status

Shutdown Temperature

This item allows you to set up the CPU shutdown Temperature. This item only effective
under Windows 98 ACPI mode.

CPU FAN Control By

The Choice mart? Can make your SYS FAN to reduce noise.

The Choices: SMART

(default),always on.

CPU Vcore +3.3V, +5.0V, DRAM Voltage,AGP Voltage, Voltage Battery

Detect the system’s voltage status automatically.

Current CPU Temp

This field displays the current temperature of CPU.

Current CPU FAN Speed

This field displays the current speed of CPU fan.

Current SYS FAN Speed

This field displays the current speed SYSTEM fan.

Show H/W Monitor in POST

If you computer contain a monitoring system, it will show PC health status during POST
stage. The item offers several delay time to select you want.

The Choices: Enabled

(default), Disabled .

Summary of Contents for P4M800-M7A - BIOS SETUP





































Search results

Summary of Contents for P4M800-M7A - BIOS SETUP

Reviews:

Related manuals for P4M800-M7A - BIOS SETUP

Brands by name

Popular brands

Biostar P4M800-M7A - BIOS SETUP, Manual

Search results

Summary of Contents for P4M800-M7A - BIOS SETUP

Reviews:

Related manuals for P4M800-M7A - BIOS SETUP

Brands by name

Popular brands