NF325-A9
12
CHAPTER 3: HEADERS & JUM PERS SETUP
3.1 H
OW TO
S
ETUP
J
UMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin
opened
Pin
closed
Pin1-2
closed
3.2 D
ETAIL
S
ETTINGS
JUSB_KBMSV1:
Power Source Header for PS/2 Keyboard, PS/2 Mouse and USB ports
Pin 1-2 Close:
+5V f or PS/2 key board, PS/2 mouse and USB ports at J1394_USB1 and
JUSBLAN1.
Pin 2-3 Close:
PS/2 key board, PS/2 mouse and USB ports at J1394_USB1 and USBLAN1
are powered by +5V standby v oltage.
1
3
Pin 1-2 close
1
3
1
3
Pin 2-3 close
Note:
In order to support this function “Power-on system via key board, mouse and
USB dev ice”, “JUSB_KBMSV1” jumper cap should be placed on Pin 2-3.
