NF3 250 AM2 BIOS Setup
29
controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides
non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource is assigned to the PCI Bus
or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled
(default), Enabled.
Resources Controlled By
By Choosing “
Auto(ESCD)
” (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.By
Choosing “ Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the “ Press Enter” tag, you will be directed to
a submenu that will allow you to configure the system interrupts. This is only
configurable when “ Resources Controlled By” is set to “ Manual”.
IRQ-3 assigned to
PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to
PCI Device
IRQ-7 assigned to
PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to
PCI Device
IRQ-11 assigned to
PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to
PCI Device
IRQ-15 assigned to
PCI Device
