N4SLI-A9
26
Step 5: Connect a 4-pin ATX power cable to PEX power connector
(JPEXPWR1), this will ensure the stabilization of your system.
Step 6: Insert the SLI Bridge (BRI-2) connector on the gold-fingers on
each graphics card.
Front view Side view
Step 7: To securely fix the connector between two graphics cards, a
retention bracket must be installed.
Step 7-1: Remove any of the bracket cover between the two
graphics cards.
Step 7-2: Align and insert the retention bracket into the slot
and then fix it with a screw.
Notice:
1. Make sure the retention bracket supports the SLI Bridge
(BRI-2) firmly.
2. Retention bracket is optional
Gold-fingers on
two graphics
