Chapter2
BIOS Setup
2-31
2.9 Frequency/Voltage Control
Figure 9. Frequency/Voltage Control
CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
Frequency / Voltage Control
Auto Detect DIMM / PCI Clk
Enabled
CPU Host/PCI/Spread Spec.
Default
Item Help
Menu Level
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values F6 :Fail-Safe Defaults F7 : Optimized Defaults
Auto Detect DIMM / PCI CLK
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The Choices: Enabled
(default), Disabled.
CPU Host / PCI / Spread Spec.
This
item allows you to select CPU Host Clock (CPU / PCI).
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the
processor.
