Biostar M7SXG User Manual Download Page 8

Page: 8 / 73

Chapter

Motherboard

Description

1-3

Green Functionality

−

Supports Award BIOS ™ power management functionality.

−

Has a power down timer from 1 to 15 minutes.

−

Wakes from power saving sleep mode with any keyboard or mouse
activity.

BUS Slots

−

One AGP slot (support AGP v2.0 compliant).

−

One CNR slot.

−

Three 32-bit PCI bus slots.

Flash Memory

−

Supports flash memory functionality.

−

Supports ESCD functionality.

Built in IDE Facilities

−

Supports four IDE hard disk drives.

−

Supports PIO Mode 4, Master Mode, and high performance hard disk
drives.

−

Supports disk transfer rates up to 100 MB/second.

−

Supports Ultra DMA 33, Ultra DMA 66, Ultra DMA 100 Bus Master
Modes.

−

Supports IDE interface with CD-ROM.

−

Supports high capacity hard disk drives.

−

Supports LBA mode.

AC’97 Sound Codec Onboard

−

AC-LINK protocol compliance.

−

Compliant with AC’97 2.2 specification.

−

18-bit full duplex stereo ADC, DACs.

−

SNR>95 dB through mixer and DAC.

−

AC-3 playback required for PVD applications.

Summary of Contents for M7SXG










































































Search results

Summary of Contents for M7SXG

Reviews:

Related manuals for M7SXG

Brands by name

Popular brands

Biostar M7SXG, User Manual

Search results

Summary of Contents for M7SXG

Reviews:

Related manuals for M7SXG

Brands by name

Popular brands