Biostar M7SXG User Manual Download Page 46

Page: 46 / 73

Chapter 2

BIOS Setup

2-10

CPU L2 Cache ECC Checking

This item allows you to enable/disable CPU L2 Cache ECC Checking.

The Choices: Enabled

(default), Disabled.

Quick Power On Self Test

Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.

Enabled

(default)

Enable quick POST.

Disabled

Normal POST.

First /Second/Third/ Boot Other Device

These BIOS attempts to load the operating system from the devices in the sequence
selected in these items.

The Choices:

Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2,

HDD-3, ZIP100, LAN, HPT370, Enabled, Disabled.

Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive
assignments.

The Choices:

Enabled,

Disabled

(default).

Boot Up Floppy Seek

Enabling this option will test the floppy drives to determine if they have 40 or 80
tracks. Disabling this option reduces the time it takes to boot-up.

The Choices:

Enabled

(default), Disabled.

Boot Up NumLock Status

Selects the NumLock. State after power on.

(default)

Numpad is number keys.

Off

Numpad is arrow keys.

Summary of Contents for M7SXG










































































Search results

Summary of Contents for M7SXG

Reviews:

Related manuals for M7SXG

Brands by name

Popular brands

Biostar M7SXG, User Manual

Search results

Summary of Contents for M7SXG

Reviews:

Related manuals for M7SXG

Brands by name

Popular brands