Motherboard Manual
6
Step 1:
Align a DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
Step 2:
Insert the DIMM firmly into the slot until the retaining chip snap back in place
and the DIMM is properly seated.
Note1:
The DIMM must be installed to DIMMA1(DDR3_A1) slot first.
Note2:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location
DDR3L Module
Total Memory Size
DIMMA1 512MB/1GB/2GB/4GB/8GB
Max is 16GB
(Supports up to 8GB Memory
for DDR3L-1600)
DIMMB1 512MB/1GB/2GB/4GB/8GB
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
DIMMA1
DIMMB1
Disabled O
X
Enabled O
O
(O means memory installed, X means memory not installed.)
Note:
When installing more than one memory module, we recommend to use the same brand and
capacity memory on this motherboard.
