J3160MD/J3060MD
9
2.5 Headers & Connectors
ATXPWR1: ATX Power Source Connector
For better compatibility, we recommend to use a standard ATX 24-pin power
supply for this connector. Make sure to find the correct orientation before plugging
the connector.
Pin Assignment Pin
Assignment
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3
Ground
16 PS_ON 4
+5V
17 Ground 5
Ground
18 Ground 6
+5V
19 Ground 7
Ground
20 NC 8 PW_OK
21 +5V 9
Standby
5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12
+3.3V
Note1:
Before you power on the system, please make sure the ATXPWR1 connector have been
plugged-in.
Note2:
Insufficient power supplied to the system may result in instability or the peripherals not
functioning properly. Use of a PSU with a higher power output is recommended when configuring a
system with more power-consuming devices.
SATA1/2: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
