945P-A7 BIOS Manual
35
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
The Choices: 100MHZ
(default).
Special Notice:
If unfortunately, the system’s frequency that you are selected is not functioning, there
are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON” status. All the
CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that keep-on pressing
the <Insert> key until the power-on screen showed. This action will boot-up the system
according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B
damage.
