945P-A7 BIOS Manual
24
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which
I/O Address.
The Choices: 378/IRQ7
(default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default value is SPP.
The Choices:
SPP
(default) Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
ECP
Using Parallel port as Extended Capabilities Port.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices:
3
(default), 1.
POWER After PWR-Fail
This setting specifies whether your system will reboot after a power
fail or interrupts occurs.
Off
Leaves the computer in the power off state.
On
Reboots the computer
.
Former-Sts
Restores the system to the status before power failure or
interrupt occurs.
The Choices: Off
(default), On, Former-Sts.
