Biospace inbody s10 User Manual Download Page 81 | Manualshive

Page: 81 / 89

background image

66

2)    How to Operate IB Battery 110

a. When used for the first time
Check  the  remaining  battery.  If  you  press  the  LED  ON  button  once,  you  will  hear  a  beep.
When you press the LED ON button once again, the remaining battery is displayed on the
LED.

b. When recharging
While the IB Battery 110 is recharging and connected to the adapter, the remaining battery
LED flashes. If all three LEDs lights up and the flashing stops, it means that recharging is
complete.

c. When recharging is needed
If the IB Battery 110 is depleted and only 10% remains, you will hear an alarm sound ‘beep-
beep-beep-beep-beep’ from the IB Battery 110. Please recharge the IB Battery 110.

d. Check remaining battery
If you press the LED ON button, the LED flashes according to the remaining battery. It
flashes for approximately 3 seconds and turns off.

e. When storing IB Battery 110
·  When  the  IB  Battery  110  is  not  used,  store  while  pressing  the  LED  ON  button  for  more
than 3 seconds until you hear a beep sound.
· When  the  IB  Battery  110  is  not  used  for  a  long  time,  store  after  sufficiently  charging  the
battery to prevent over discharging of the battery.

f. Connection Cable
· Please use the connection cable for only connecting the IB Battery 110 to InBody S10.
· Do not insert both sides of the connection cable to both sockets of the IB Battery 110.
It can cause the IB Battery 110 to malfunction.

«
...
79
80
81
82
83
...
»

Summary of Contents for inbody s10


























































































Reviews:

No comments

Related manuals for inbody s10

Brand: 3nh Pages: 10

Brand: Larson Davis Pages: 193

Brand: Facom Pages: 116

Brand: ICT Pages: 48

Brand: OfiTE Pages: 67

Brand: Bacharach Pages: 28

Brand: Kathrein Pages: 10

Brand: aci Pages: 5

Brand: LaserLiner Pages: 52

Brand: Veris Pages: 8

Brand: E-Mon Pages: 72

Brand: Chauvin Arnoux Pages: 44

Brand: Droplet Pages: 35

Brand: Sencore Pages: 75

Brand: truflo Pages: 33

Brand: Fluke Pages: 6

Brand: ZIEHL Pages: 37

Brand: XPOtool Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands