The remote sensor can be placed on any flat surface or mounted on a wall.
Wall Mount
4.0 Calendar and Clock Setup
1. Press the
SET
button. The year digit will begin to flash.
2. Press the
UP
or
DOWN
button to toggle to the correct year.
3. Press the
SET
button to confirm.
4. The month digit will begin to flash. Follow steps 2 and 3 to set the correct month, date, hour,
minutes and 12/24 hour format.
5.0 Setting Alarm Time
1. Press the
ALARM
button once to enter alarm mode.
AL
will be displayed between the hour
and minute digits.
2. Press the
ALARM
button again to activate or deactivate the alarm. When the alarm is
activated will be displayed between the hour and minute digits.
3. Press and hold the
ALARM
button. The hour digit will begin to flash.
4. Press the
UP
or
DOWN
button to set the hour.
5. Press the
ALARM
button to confirm. The minute digits will begin to flash.
6. Press the
UP
or
DOWN
button to set the minutes.
7. Press the
ALARM
button to confirm. The clock will automatically return to regular mode.
8. When the alarm sounds press the
SZN/LIGHT
button, the alarm will sound again in
approximately 5 minutes. To turn off the alarm firmly press any other button, when
alarm sounds.
6.0 Maximum and Minimum Memory
1. Press the
UP/MEM
button once to display the maximum readings. Press the
UP/MEM
button again to display the minimum readings.
2. To clear the memory, press and hold the
UP/MEM
button when the max or min readings are
displayed. This will reset the memory to the current temperature and humidity readings being
displayed on the monitor.
NOTE
: All the maximum and minimum readings will be reset automatically at 12:00am (0:00) everyday.
7.0 °C/°F Switchable
The default measurement for temperature is °C, press the
DOWN/CF
button to toggle between
°C and °F.
8.0 Backlight
Press the
SNZ/LIGHT
button to turn the blue backlight on for a few seconds.