Project Type
Instructions
Date: March 27 2020
Customer: Thermor Ltd
Job Number: TH1011
Item Number: 3AL1-3E
Designer: Alex Vranjesevic
Revision: B
Artwork is not to be amended or scaled. If any changes
are required please send through Thermor office with
instructions, and we will amend here and resend artwork
through. PLEASE RETURN WITH SIGNATURE
Contact: Graphic’s Department
Colour Breakdown
Reason For Project:
New Item:
New Branding: X
Design Update:
N/A:
UPC (For Reference Only)
Blood pressure
classification
Time
Systolic blood
pressure (mmHg)
Diastolic blood
pressure (mmHg)
Pulse rate
(beats/minute)
Symbol Guide
Irregular heartbeat
Memory
User number
Medication reminder
Heartbeat during measurement
Low battery
2.3 Inserting the Batteries
Follow these steps to insert the four “AA” batteries in the device.
1. Open the battery compartment cover in the direction shown.
2. Insert the four “AA” batteries with the correct polarity as indicated.
3. Replace the battery compartment cover.
2.4 Using the AC Adapter
You may also operate this monitor using the included AC Adapter (output 6V DC/600
mA with DIN plug). Use only the included AC Adapter to avoid damaging the unit.
1. Ensure that the AC Adapter and cable are not damaged.
2. Plug the adapter cable into the AC Adapter port on the blood pressure monitor.
3. Plug the adapter into your electrical outlet. When the AC adapter is connected,
no battery current is consumed. Note: No power is taken from the batteries while
the AC adapter is connected to the monitor. If electrical power is interrupted,
(e.g., by accidental removal of the AC adapter from the outlet) the monitor must
be reset by removing the plug from the socket and reinserting the AC adapter
connection.
