20
3. Quick Start
3.1
Qsep
1
™ Quick Start
1.
Ensure the SD card is properly plugged in the socket (Fig. 1 and 2).
SD card needs to be plugged-in before power on. The SD card CAN NOT be
initialized with hot plugging
.
2.
Connect the air tube.
3.
Plug the power cord (labeled
Qsep
1
)
4.
Switch on
Qsep
1
, the LED lights (multiple color light) (Fig. 3). Wait 25 seconds
for the instrument and Wi-Fi initialization, and the green LED will start flashing
(Fig. 4).
DO NOT switch on the instrument immediately after powering off. Wait at least
5 seconds
The green flashing LED shows the instrument is successfully ready for
connection. If not, please repeat the step 4.