-
4
-
BIOPAC Systems, Inc.
BACK PANEL
Back Panel, MP35
The back panel of the MP35 has an analog output port, a USB port, an I/O Port, a Trigger Port, a DC
input, a fuse holder, and a power switch, and the unit’s serial number.
The back panel of the MP30 has an analog output port, a serial port, a DC input, a fuse holder, and a
power switch, and the unit’s serial number.
Analog Out port
There is one 9-pin male “D” analog output port on the back of the MP35/30 that allows signals to be
amplified and sent out to devices such as headphones.
USB port (MP35 only)
The MP35 connects to the computer via a USB Port, located just below the word USB.
•
Uses a standard USB connector.
•
Should only be used to connect the MP3
5
to a PC or Macintosh.
Serial port (MP30 only)
The MP30 connects to the computer via a serial port, located just below the word Serial.
•
Uses a standard MINI DIN 8 connector.
•
Should only be used to connect the MP30 to a PC (with ISA or PCMCIA card) or Macintosh.
Headphone Output (MP35 only)
Accepts a standard (1/4” or 6.3mm) stereo headphone jack.
I/O Port (MP35 only)
•
Accepts a DB 25 Female connector.
•
Input/Output port used to connect digital devices to the MP35.
Trigger Input (MP35 only)
•
Accepts a male BNC connector.
•
Input port used to send trigger signals from another device to the MP35.
•
Used to synchronize MP35 units when more than one MP35 is used.
DC Input
for the latest product updates
Use the DC Input to connect a battery, AC/DC converter or other power supply to the
MP35/30.
