BIONIME Rightest Elsa, User Manual

Page: 10 / 26

17 16
Activating the Meter and Changing the Battery
1. Turn the meter over.
Press and slide down the
battery cover to open.
PRECAUTION
- Please follow local regulations to discard used batteries properly.
4. The meter will perform a self-test.
5. Press the main button to exit the self-test and enter the Settings mode.
6. Set the time and date when the batteries are replaced. See "Setting Up Your Meter - Setting the
Time, Volume and Date". Test results are still stored in the memory.
3. Slide the battery cover
back on until it snaps into
place.
2. Install the battery.
Make sure the battery is
inserted the correct way up.
Activating the Meter and Changing the Battery
Your meter comes with 1 CR2032 3V battery installed. A new battery will provide sufficient power to
perform about 1,000 tests under normal use. Press the main button or insert a strip to activate your
meter.
NOTE
For some meters, first remove the the plastic tape then press the main button to activate the
meter.