To re-activate the nightlight feature, simply press the light
button again.
Remote Control (BAP1300 only)
Model BAP1300 comes with a remote control handset.
The product can be operated with the remote control handset or
by the manual touchpad on the product. The remote control
handset requires two "AAA" batteries which are included for
your convenience. There are five buttons on the remote
control – Power and 4 speed settings.
MAINTENANCE INSTRUCTIONS
1. Before cleaning make sure the unit is switched off
and unplugged.
2. Carefully wipe the unit with a soft, damp cloth with a
non-abrasive cleaner. Treated with care, your Bionaire
®
air
cleaner will retain its attractive appearance for many years.
Over time dust may accumulate on the front grill.
This can be removed by wiping with a damp cloth.
AIR CLEANER TROUBLESHOOTING GUIDE
Problem
Solution
☛
Unit will not operate
✔
Check that the unit is plugged and the electrical
outlet or circuit breaker is working.
✔
Make sure the unit is on by pressing the power button.
✔
If the door is ajar the unit will not operate. Make sure
the filters are properly installed and firmly close the door.
✔
If the door has been open then you will need to select a
speed after the door has been closed.
☛
Display screen is blank
✔
Press power button.
☛
Decreased air flow
✔
If Digital Filter Monitor is indicating low performance,
change the HEPA filter. For replacement filters call
1-800-253-2764 or visit www.bionaire.com.
✔
If digital filter monitor is below 10%, the carbon
filter may need to be changed.
✔
Wash the Pre-filter.
✔
Make sure nothing is blocking air inlet.
☛
Night light does not work
✔
Make sure room is dark.
✔
To check, place thumb over sensor.
☛
Night light always on
✔
Push the
button.
✔
Clean sensor.
✔
Sensor may be blocked.
