usage and indoor air conditions.
When you turn on your air cleaner, it may take up to 60
seconds for the Filter Monitor to begin to read the filter life.
☛
TIP: It is normal for the Filter Monitor to read
at slightly different levels from last use when re-started.
When the filter life remaining is approximately 10%, the Change
Filter symbol on the digital control panel will appear. When the fil-
ter life remaining is at 0%, you should change your HEPA filters.
DO NOT wash the HEPA filters.
HEPA filter replacement procedure:
1. Turn off and unplug your air cleaner.
2. Open the front door.
3. Slide the HEPA filter assemblies off of
the posts.
4. To replace the HEPA filter assembly,
slide the hang tabs onto the guide post
and slide backwards. Press the filter in
to ensure a tight fit (Figure 8).
5. Repeat this procedure for each filter assembly (BAP1175
for two filters and BAP1300 for four filters) and shut the door.
Reset the Filter Monitor after changing the HEPA filters by
simultaneously pressing the power and sleep buttons on
the control panel.
Replacement Filter Models
BAP1175 PreFilter (1 pack)
Model 1235P
BAP1300 PreFilter (1 pack)
Model 1236P
Carbon Filter (4 pack)
Model A1260C
HEPA Filter (2 pack)
Model A1230H
To order replacement filters, please call 1-800-253-2764
or visit our website at www.bionaire.com for more information.
NIGHTLIGHT INSTRUCTIONS
The
QUIETech
™
HEPA air cleaners are equipped
with a nightlight which illuminates the LCD screen in a dark
room. The nightlight operates on a sensor and will illuminate
when the room becomes dark. When the room becomes light,
the nightlight feature will automatically turn off.
To de-activate the nightlight, simply press the
light button on
the control panel. This will de-activate the nightlight feature.
Fig 8
