PLeaSe read and SaVe tHeSe
imPOrtant SaFetY inStrUCtiOnS
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the
instruction manual.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids. Plug
the appliance directly into a 120V AC electrical outlet.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on
or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or
flammable fumes.
8. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
9. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has been
dropped/damaged in any manner.
10. The use of attachments not recommended or sold by
the appliance manufacturer may cause hazards.
11. Do not use outdoors.
12. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or leave
exposed to high traffic areas.
13. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
14. Always use on a dry, level surface.
15. Do not operate fan until fully assembled with all
parts properly in place.
16. This product is intended for household use ONLY and
not for commercial or industrial applications.
17.
WarninG:
To reduce the risk of electrical shock
injury to persons, do not use in window.
18.
WarninG:
To reduce the risk of fire or electric
shock, do not use this fan with any solid-state speed
control device.
PLeaSe read and SaVe
tHeSe imPOrtant
SaFetY inStrUCtiOnS
aSSemBLY inStrUCtiOnS:
(See FiGUre 1)
Your fan comes fully assembled and is ready for use.
OPeratinG inStrUCtiOnS:
(See FiGUre 2)
1. Set the fan on a dry level surface.
2. Plug power cord into any standard 120V AC outlet.
3. To turn the fan on, press either speed control button.
1-Low, 2=high.
4. To turn the fan off press the on/off button.
5. To turn on the oscillation feature press the oscillation
button once. To turn the oscillation feature off press
the oscillation button once.
CLeaninG/maintenanCe
inStrUCtiOnS:
Follow these instructions to correctly and safely care
for your fan.
Please remember:
• Always unplug the fan before cleaning.
• Do not allow water to drip on or enter
into fan housing.
• Be sure to use a soft cloth moistened with a
mild soap solution.
• Do not use gasoline, thinner or benzene as a cleaner.
Fan CLeaninG:
Clean the fan grill, housing and
base with a soft, damp cloth. Do not attempt to remove
the fan blade. Please use caution around the motor
housing area. Do not allow the motor or other electrical
components to be exposed to water.
Fan StOraGe:
When storing your fan in the off season, it is important
to keep it in a safe dry location. It is important to protect
the fan head from dust. WE STRONGLY RECOMMEND
USING THE ORIGINAL BOx FROM PURCHASE
.
Figure 2
If you have any questions regarding your product or
would like to learn more about other Bionaire
®
products, please contact our Consumer Service
Department at 1-800-253-2764 or visit our website at
www.bionaire.com.
1
2
3
Figure 1
1. On/Off Button
2. Speed Control Buttons
1 = Low speed
2 = High speed
3. Oscillation Button
F e at U r e S - O P e r at i O n S
C L e a n i n G a n d m a i n t e n a n C e
tHiS aPPLianCe HaS a POLarized PLUG (one blade is wider than
the other). to reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. if the plug does not fit
fully in the outlet, reverse the plug. if it still does not fit, contact
a qualified electrician to install the proper outlet.
dO nOt attemPt tO mOdiFY tHiS PLUG Or deFeat tHiS
SaFetY FeatUre in anY WaY.
BT014-U_Eng.indd 2
12/3/08 12:05:43 PM
