11
Cable Diagram Pro Plus
CABLE CAB
(Optional) Place door towards user.
CABLE CHAIN
Use to run cables from front surface
to rear surface. Push in from inside.
LONG CABLES
Use LONG cables to connect both front
legs to ports #1 & #2 in controller box.
GROMMET HOLE
Place grommet into
grommet hole. Route
cable accordingly.
4 PORT CONTROLLER
box for REAR surface
CABLE TRACKS
Red FRONT surface
Blue REAR surface
SWITCH
for FRONT surface use long 45˚ angle bracket.
Control switches connect to port A1.
WIRE CLIP
A wire clip MUST be placed directly
behind switch to prevent cable droop
POWER CABLE
Connect power cables to power
strips inside cable cabs.
m
SHORT CABLES
Use SHORT cables to connect 3 rear legs
to ports #1, #2 & #3 in controller box.
SHORT CABLE/REAR LEG
LONG CABLE/FRONT LEG
SWITCH
SHORT CABLE/REAR LEG
POWER CABLE
LONG CABLE/
FRONT LEG
2
DC
AC
3
4
1
A2
A1
IMPORTANT:
All cables must be tacked up and made neat with supplied cable guides. NO cables may hang down ex-
cept those passing through cable chains. Make sure cables have enough slack between surfaces to allow
full height adjustment between surfaces.
IMPORTANT:
Extend desktops to full opposite heights to ensure that cables will travel w/o stress).
