Biomorph Flexo Corner, Assembly, Page: 3 / 17

3
Assembly Overview Assembly Overview
IMPORTANT:
DO NOT BUILD THIS TABLE
UPSIDE DOWN. FRAME MUST BE BUILT RIGHT SIDE UP, IN PLACE, AND TOPS THEN ATTACHED. If this
procedure is not followed then tops will not line up with frame. DO NOT REMOVE PROTECTIVE MATERIAL FROM
TOPS UNTIL FINAL ASSEMBLY.
IMPORTANT:
When moving this desk, do not drag frame as it can cause leg actuators to bind and fail. Always lift off
floor using frame, not tops.
a
a
c
b
d
d
g
g1
e
e1
f
f1
e1 f1 g1 e f g
Replaces
for Corner application only